Burt Process Training Ask Now Burt Process Equipment About Burt Process Equipment burt process equipment Mail to customerservice@burtprocess.com Home shop online Get Quote Data sheets and Manuals Burt Process Training Contact Us
MANUFACTURERS: SEARCH:
level-tranmitter
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
level-switches
flow-switches
EchoPod-Sensors
indicators-controllers1
Leak_Detection_Switch
webcal
installation-fittings
parts-and-accessories
Contact Us
 
/Contact-Information.php
 
     
 
 
 
 
EchoSafe® Ultrasonic Level Transmitter

LU80-84
     
 
 
floateak
   
 
       
       
       
       
       
         
   
 

Application

The general purpose ultrasonic level transmitter provides continuous level measurement up to 32.8' (10m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is ideally suited for corrosive, ultrapure, sticky or dirty liquids, and is broadly selected for bulk storage, day tank, lift station and process tank level applications.

Features

Offered in 4 measurement ranges from 9.8' (3m) to 32.8' (10m)
Configuration is simple via integral push button display module
LCD display indicates level in inches, centimeters and percentages
Narrow 2" or 3" beam width for applications with limited measurement space
Fail-safe intelligence and diagnostic feedback for simple troubleshooting
Narrow 3" beam width for applications with limited measurement space
PVDF transducer and NEMA 4X polycarbonate enclosure for corrosive liquids
Automatic temperature compensation for accurate measurement

Specifications

Range: LU80: 4" to 9.8' (10cm to 3m)
LU81: 8" to 16.4' (20cm to 5m)
LU83: 8" to 26.2' (20cm to 8m)
LU84: 12" to 32.8' (30cm to 10m)
Accuracy: ± 0.2% of range
Resolution: LU80: 0.019" (0.5mm)
LU81/83: 0.039" (1mm)
LU84: 0.078" (2mm)
Dead band: LU80: 4" (10cm)
LU81/83: 8" (20cm)
LU84: 12" (30cm)
Beam width: LU80: 2" (5cm)
LU81/83/84: 3" (7.6cm)
Configuration: Push button
Memory: Non-volatile
Display type: LCD, 6-digit
Display units: Inch, cm and percent
Supply voltage: 12-28 VDC
Loop resist.: 500 Ohms @ 24 VDC
Signal output: 4-20 mA, two-wire
Signal invert: 4-20 mA, 20-4 mA
Signal fail-safe: 4mA, 20mA, 21mA, 22mA
or hold last
Process temp.: F: -7° to 140°
C: -20° to 60°
Temp. comp.: Automatic
Ambient temp.: F: -40° to 160°
C: -40° to 71°
Pressure: MWP = 30 psi (2 bar)
Enclosure rating: NEMA 4X (IP65)
Encl. material: Polycarbonate
Encl. hardware: Brass & stainless
Enclosure vent: Water tight membrane
Conduit entrance: Dual, 1/2" NPT
Trans. material: PVDF
Process mount: LU80: 1" NPT (1" G)
LU81/83/84: 2" NPT (2" G)
Mount gasket: Viton®
Classification: General purpose
Compliance: CE, RoHS

 

 
Popular Models
Part No. Description
LU80-5101EchoSpan Level Transmitter, 3m (9.8'), 1" NPT
LU80-5161EchoSpan Level Transmitter, 3m (9.8'), 1" G
LU81-5101EchoSpan Level Transmitter, 5.5m (18.0'), 2" NPT
LU81-5161EchoSpan Level Transmitter, 5.5m (18.0'), 2" G
LU83-5101EchoSpan Level Transmitter, 8m (26.2'), 2" NPT
LU83-5161EchoSpan Level Transmitter, 8m (26.2'), 2" G
LU84-5101EchoSpan Level Transmitter, 10m (32.8'), 2" NPT
LU84-5161EchoSpan Level Transmitter, 10m (32.8'), 2" G
   
  @ Burt Process Equipment
All Right Reserved, Designed & Developed by
Wempro